Is the course suitable for complete beginners?
Yes. The course starts with installing Arduino IDE and uploading your first program, then gradually introduces motors and sensors. Follow the lessons in order and try each example on your robot.
Where should I start after unpacking the kit?
First, check the kit contents and read the safety rules. Then open the course plan and continue to the first lesson.
Where can I download Arduino IDE and the libraries?
Start with the Arduino IDE installation guide, then install the Little Robot libraries. Both pages include ready-to-download files and step-by-step setup instructions.
Do I have to complete the lessons in order?
That is the recommended approach: each lesson builds on the knowledge and assembled parts from previous lessons. If your robot is already assembled and you know Arduino, you can jump directly to a lesson or the reference guide.
What should I do if a program will not upload or the robot behaves incorrectly?
Check the power, selected board and port, cable connections, and installed libraries. Common problems and fixes are collected on the Troubleshooting page.
Where can I find the commands for motors and sensors?
All available functions, parameters, and examples are listed in the library reference.
Where can I get help if the answer is not on the site?
Message us on Telegram and tell us which step caused the problem. If possible, include a photo of the wiring, the error message, and your code.